How to Replace Crankshaft Seal 2001-2005 Honda Civic

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-110-Q This video shows you how to install a crankshaft seal on your 2001-2005 Honda Civic. This repair was done on a 2001 Honda Civic EX 1.7L Sedan 4-Door FWD and the process should be similar on the following vehicles: 2001 Honda Civic 2002 Honda Civic 2003 Honda Civic 2004 Honda Civic 2005 Honda Civic Tools you will need: • Flat Blade Screwdriver • 10mm Wrench • 12mm Wrench • 10mm Deep Socket • 10mm Socket • 12mm Socket • 14mm Deep Socket • 14mm Socket • 17mm Socket • 19mm Socket • 36mm Socket https://trq.video/oe-1AAST00006 • Trim Tool Set https://trq.video/obN-1AXXX00006 • 1/2 Inch Ratchet • 1/4 Inch Ratchet • 3/8 Inch Drive Ratchet • Socket Extensions • Torque Wrench https://trq.video/odK-1AXAA00044 • Gloves https://trq.video/oaf-1AXSS00048 • Safety Glasses • 6mm Allen Wrench • Floor Jack • Pick https://trq.video/oaZ-1AXAA00037 Subscribe:    / @trq   Check out our playlist: Honda Civic 2001-2005 7th Generation:    • Honda Civic 2001-2005 7th Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.