Indesit IWC6125: Unsuccessful First Wash P1 - Cotton 90ºC + Extra Rinse

WARNING: Anyone commenting unnecessary spam comments such as "First" or "First to view" etc will immediately be blocked. It is considered spam and there is no such special award for being the first to view a video. ____________________________________________________ Short notice: Unfortunately I do not take requests on this channel, mainly due to them being time consuming and sadly having a rather busy schedule. However, please enjoy the content I post and thank you for watching! ––––––––––––––––––––––––––––––––––––––––––––––––––– This is the initial wash cycle after fitting new brushes to the Indesit IWC6125 that we found by the kerbside. Performing well into the wash, the machine gets off to a good start. However, there seems to be another, major underlying fault. Either due to the brushes wearing out, or the machine being left in outdoor conditions, the PCB/Module is giving us issues. The machine begins to "glitch" at random intervals, either when the machine has to heat above 60ºC, drain for an Intermediate Spin, starting a cycle or changing from spin to anti-tangle, it'll cut into an emergency drain, with all 5 LED lights flashing. This seems to be an unknown error code, even by Indesit's own diagnosis. The cost of a new board and/or with programmer card, is beyond any profit this machine could make for me. So, I managed to film a final (yet unsuccessful again) wash on Flash Cotton, before the machine was later put out to scrap. Sadly, not always can things turn out successful, but the main thing, is you've tried. But, not that I like these anyway, but there'll always be something else to find. Thank you and enjoy! :)