How to Replace Engine Knock Sensor 2011-2016 Kia Optima

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-180-bH This video shows you how to install a new knock sensor in your 2011-2016 Kia Optima. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes. Estimated installation time for a professional technician is approximately: 36 minutes This repair was done on a 2015 Kia Optima LX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2011 Kia Optima 2012 Kia Optima 2013 Kia Optima 2014 Kia Optima 2015 Kia Optima 2016 Kia Optima Tools you will need: • 10mm Wrench • 10mm Socket • 12mm Socket • Trim Tool Set https://trq.video/obAR-1AXXX00006 • Pliers • Magnet - Extendable • Pick https://trq.video/oaEQ-1AXAA00037 • Gloves https://trq.video/oeek-1AXSS00048 • Safety Glasses Subscribe:    / @trq   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.