Do I need to adjust my Motorcycle valves on my DR650?

Do I need to adjust my Motorcycle valves? Dino’s Tinker Shed, S1-Ep22. DR650 valves, how they work and how to adjust them. In this episode I will deep dive into the components of The DR650 valve train, how these parts work together and then, how to adjust the valve gap so your bike runs its best. This is a longer video so if you are just looking for how to adjust your valves that starts at 28:27 in the video and you can use the time code chapters bellow in the description to skip ahead to the process. I also go over how to set the gap on your spark plugs as you already must take one out and have great access at this time. Setting your valve gap will ensure good engine performance, ensure the correct valve duration is maintained and you can monitor the wear and tear on your valve train. TIME CODE CHAPTERS: 00:00- Cold opening 01:00- Intro 01:20- Overview of what a valve train does 03:45- In depth discussion on valve components, where they are located and what they do. 13:35- What to expect when adjusting valves 14:40- START HERE IF YOU JUST WANT TO SET YOUR VALVES 14:43- Tools required and what they do 22:06- Removal of tank 24:30- Preparing the area around the valves 25:40- Removal of the spark plug 26:00- Removal of the timing and flywheel bolt inspection plugs 26:43- How to locate the intake and exhaust valve location 27:07- Removal of the valve covers 27:50- Finding Top Dead Center (TDC) 28:27- Adjusting the valves 31:38- Closing the valve covers 31:38- Setting the gap on the spark plugs 38:22- Last words and summary