¿Cómo SALVAR un iPhone mojado si no enciende? ✅

Recover the plate of a burned device, it is a wet iPhone 11 and we are going to show you how to recover it professionally. This is MasterClass number two, where in less than 20 minutes you will learn a lot of tricks to recover any wet iPhone. 00:00 Video Intro 00:32 Remove the bottom screws 00:38 Raise iPhone 11 screen 00:52 iPhone 11 inside too wet 1:02 Remove the battery 1:10 Remove the screen 1:24 The first visual inspection 1:33 Disassemble the motherboard 1:47 Remove bolts with worn heads 2:58 Remove main camera 3:12 Inspect motherboard for moisture 3:26 Inspect the plate under the microscope 3:50 Part of the plate badly burned by water 4:29 Separate the plates (sandwich type) of the iPhone 11 5:45 Inspect for moisture inside the motherboard 6:58 Countries by number of telephones per inhabitant 7:14 Cleaning wet plate 7:41 Check SMD components, if they are well soldered 8:01 Clean resin from motherboard (SMD components) 8:46 The destruction caused by moisture and corrosion 9:58 How to look up a value of an SMD component in the schematic 10.10 Can we bridge a resistor? 10:50 Recycle two capacitors 11.09 Soldering an SMD capacitor 11:25 The characteristics of an SMD capacitor 11:45 How to solder an SMD capacitor? 12:13 Measure SMD capacitors 12:46 Soldering the plates of an iPhone 11 14:34 Check wet iPhone, test screen 16:02 The price of wet iPhone 11 repair 17:29 Final conclusion, how to fix a wet iPhone In this section of MasterClass we are going to upload the best videos, with the most complicated repairs that we have in our laboratory. These classes are focused on mobile phone and tablet technicians. ✅ Tools👉👉 https://movilone.net Become a member of this channel to enjoy benefits:    / @movilone