Como Programar Control Y Alarma Chevrolet Chevy C2 Avilcar

How to program a remote control How to program a Chevy remote control and even other Chevrolet vehicles Without a scanner The remote control has four buttons. To enter programming mode, turn the switch from OFF to ON 7 times within 7 seconds, starting with ON and ending with OFF. The alarm LED will light up. Once in programming mode, turn the switch to ON. Using the alarm's indicator light, enter your code. Each flash of the light represents a digit. If your first digit is 2, wait for the light to flash twice and then turn the switch off. This is how you enter the first digit. If the second digit is 1, turn the switch on, wait for it to flash once, and then turn the switch off. This is how you enter your second digit, and so on, until you have entered all 5 digits. If the code was entered correctly, the horn will sound 5 times. If a digit is entered incorrectly, wait 10 seconds and start over. If the code is still incorrect, the turn signals will flash 4 times and the horn will sound 4 times. Now, turn the ignition switch on and off 5 times, ending in the OFF position. The horn will sound 3 times, indicating that the previous remotes have been erased. Now, turn the ignition switch on and off twice, starting and ending in the ON position. After 7 seconds, the horn will sound, indicating that it's time to program your remote. You have 10 seconds to do so. Press the Chevrolet button, and the vehicle will sound the horn 3 times, indicating that the remote was successfully programmed. Once programmed, press the Chevrolet button on the remote, remove the key, and press the Chevrolet button again. The system will return to its normal state. Avilcar How To Program a Remote. How to program a Chevy remote and more for the Chevrolet car range. No Scanner Required The remote has four buttons. To enter programming mode, turn the ignition switch from OFF to ON 7 times within 7 seconds, beginning and ending with ON to OFF. The alarm LED will light up. After entering programming mode , turn the switch to ON, and with the help of the focus alarm introduce our key we had, each flash of the focus is a digit and if our first digit is 2 flashes expect the focus 2 times and close the switch, this is how we introduce the first digit , if the second digit is 1, we hope to open the switch flashes 1 time, and close the switch so we introduce our second digit and so to introduce our 5 digits If the code was entered correctly it will sound the horn 5 times If a digit is entered incorrectly, wait a period of 10 seconds and start from the beginning. If the code does not have the right, lit the lamps 4 times and the horn sounded horn 4 times. Now we open and close the switch 5 times ending in OFF, the horn will chirp 3 times, indicating that the above controls were deleted, Now open the switch 2 times beginning in ON and we ending in ON after 7 seconds sound the horn, indicating that it's time to set our control, and we have 10 seconds to do so, we press the button chevrolet and car sounded the horn three times indicating that the control was successfully programmed once programmed, press the control chevrolet, remove the key and press the button again chevrolet, return the system to its normal state. YouTube    / betopsml   mechanics blog https://aprendemecanicautomotriz.blog... Facebook   / mecanica.facil.35   Google+ https://plus.google.com/1100138034083...