Bend Tech Dragon A400 Angle and Channel Attachment - Trick-Tools.com

See it here: https://www.trick-tools.com/Bend-Tech... The new Bend-Tech Dragon A400 is ready to take on all your industrial needs. It is the complete solution for tube notching, cutting, and marking round tubing from 1 to 6 inches in diameter as well as 1 to 4-inch square and rectangle tubing. The Dragon is capable of taking a full length of tubing, cutting it to length, notching the end profile, making holes or slots as needed, and then marking any bend locations with rotation and degrees. Bend-Tech Dragon obtains all of the necessary information from Bend-Tech Industrial software automatically. Just add your plasma machine and computer! Included with the Bend-Tech Dragon are two powerful software packages; Bend-Tech Industrial and Bend-Tech Dragon Software. Working side by side, these products will allow you to create 3D CAD designs from scratch or convert from SOLIDWORKS, AutoCAD, Inventor, PRO Engineer, etc. into a readable format for the machine. Dragon Software will automatically create your cutting, marking, and etching paths directly from Bend-Tech Industrial and comes with a nesting ability to allow several parts on the same stock tube. Key Features -12 foot or 24-foot bed lengths, unlimited working length with re-positioning -2 inch through chuck allows for re-positioning of longer material with built-in laser pointer. -Works on 1 to 6 inch OD round tubing, 1 to 4-inch square, and 1 to 4-inch rectangle or l-channel. -3 heads include plasma cutting, sharpie marker, and engraving -Automatic tool change -400 lb material capacity Trick-Tools.com [email protected] 1.877.VAN.SANT