Pine Cone / Dragon’s Egg Tutorial- Right Handed

As so many of you have requested it, today we are doing the pinecone - as per the written tutorial by Beadsisters. You have a selection of ring sizes to chose from! The ones from the original design: LARGE: ID 7.8mm, 18 SWG SMALL: ID: 5.2mm, 19 SWG Then there’s the sizes that I used in this tutorial: SMALL: ID: 5.15mm, 19 SWG, AR 5.15 LARGE: ID 7.90mm, 18 SWG, AR 6.75 And finally, these are my ring sizes to achieve a tighter cone/egg: SMALL: ID: 4.55mm, 18 SWG, AR 3.88 LARGE: ID: 7.05mm, 18 SWG, AR 6.02 There is a left handed version of this tutorial, you can find it here:    • Pine Cone / Dragon’s Egg Tutorial- Left Ha...   Rings can differ from manufacturer to manufacturer; I’ve added the AR for each of my rings so you can make your own substitutions if mine don’t quite work for you ◡̈ Music: Summer - Bensound https://www.bensound.com Support by RFM - NCM https://bit.ly/37ILNlub