Газовая печь для обжига керамики

This video is about making a gas kiln that can be used for firing ceramics, raku kiln technique, or for scalding ceramics. The base is a regular 200-liter barrel. The insulation is MKRF 100 fireproof felt, three layers on the walls and bottom, and four layers on the lid. A total of approximately 12 kg were used. The felt can be replaced with ceramic fiber (keramblankett) – it would be even better. The external temperature is 1100°C, reaching 90-100°C. Firing a fully filled kiln takes about 6 hours. Gas consumption is 1/5-1/4 of a 40-kg cylinder. I have heated it to a maximum of 1100°C. It can also reach 1200°C. In cold temperatures, heating the kiln is difficult – the gas does not evaporate well. Cools down quickly – in 4-5 hours. Please note: I do not recommend glaze firing in this kiln, as it cools quickly and the glaze bubbles. The same will happen if heated too quickly. You will likely need to gradually reduce the temperature over the required time (approximately 3-4 hours from the highest temperature to 800-700°C) by adjusting the flame flow. If you want to make money on YouTube, visit http://join.air.io/rukolepie If you want to visit my website, visit http://rukolepie.com/