How to Get EMC Pro + Firmware Flash for STM32

In this video, I show you how to get EMC Pro and how to flash the firmware to an STM32 board. I explain the full process step by step, including how to purchase the license, how to activate it, and how to upload the firmware to the STM32 board. For this build, I’m using the STM32F401C board, so this tutorial focuses only on that board. After purchasing the license, you will receive the EMC project files. Then you need to install the EMC software, send the GUID from the software to the developer, and receive your license file. Once the license is activated, I will show how to flash the firmware using STM32CubeProgrammer. This guide is useful if you are building a DIY force-feedback steering wheel and want to use the EMC Pro firmware. EMC Development Facebook Page -  / emcdeveloper   (Owner of EMC) Email - [email protected] STM32CubeProgrammer - https://www.st.com/en/development-too... STM32 Firmware Installation - https://github.com/ebolzMagy/EMCFFBV2... 00:00 Intro 00:15 How To Get EMC Pro 03:44 How To Flash EMC Firmware 06:40 End #diysteeringwheel #SimRacing #DIYFFBWheel #ForceFeedback