Чистка и адаптация дроссельной заслонки Audi A6 C6 2.4 BDW / Throttle cleaning and adaptation A6C6

To remove the throttle on the Audi A6 C6 will require the following tool: Torx T30 with extension Flat blade screwdriver When removing the damper, it is recommended to change the gasket on the intake manifold VAG 06E133073A Article of throttle valve block VAG 078133062C 079133062C To adapt the throttle valve is necessary: 1) without STARTING the ENGINE, JUST the IGNITION to go into Vag-Com in the block 01 Engine 2) check for errors in 02 - Fault Codes 3) then in Basic Settings - 04 enter group 60 and press Go! 4) Click on the top button ON/OFF/Next, "ADP Run" should appear and then "ADP OK" will appear, this means that the adaptation is completed successfully If ERROR appears then you need to check the throttle and whether the connector is connected to it Blog on DRIVE2 https://www.drive2.ru/r/audi/a6/47773... Audi A6C6 2.4 BDW 2008 (6 cylinders without turbine) Filmed on Meizu 16th