Broken Spyder Repair - Rebuild paintball gun to fix leaks and firing problems

FIX YOUR BROKEN SPYDER GUN FOR LESS THAN $5! Spyder Paintball Marker Manuals: http://www.spyder.tv/product-manuals/... Identify Your Spyder Marker: http://www.pbnation.com/showthread.ph... 01:18 Tools and Parts 04:05 Disassembly 12:20 Replacing O-rings 18:00 Reassembly This video demonstrates how to rebuild your old spyder paintball gun using my old and broken Spyder Imagine. If your old marker won't shoot, the bolt won't recock, problem firing, the cause might be somewhere between the air supply and the paintball in your gun. The fix is to disassemble your gun, then clean, replace, and lube all the O-rings that sit between the ASA and the valve body. What you need: A clean working surface #015 O-rings Paintball lube or Dow 33 A clean cloth Metric hex wrench 3mm or 3mm hex bit Screw driver Philips head bit Flat head bit Tweezers (not pictured) Barrel swab or pencil to push out the valve body If you need to remove the braided line: 13mm wrench Blue loctite O-rings can be found on ebay 100 for $4 from Hustle Paintball listed as "CO2 tank o-rings."