048 Sliding dovetail planes 2.0 part 2 of 3

Hello! It is another stage of my sliding dovetail planes project. The planes will work in pairs - left plane and right plane for booth directions of cutting. If you didn't seen first part of the video just check it :) Every step is decsribed on the timeline so you can easly read what i'm doing in any moment of the video. I hope you will like it! Regards! BTW. I don't take orders and usually don't sell my planes (exception - i'm gonna sell one pair of this sliding dovetail planes on my instagram profile when they will be done). The most sure way to get some of them is take a part in giveaways for my supporters. For support click here: https://www.youtube.com/channel/UCPWT... or use my PayPal account: esortodox@gmail(dot)com Big thanks for my supporters! ANDREW DAWSON JOSHUA LUCAS ROSS TOMAZIN RENE POLAK LUBOS SULC RAMINGR SCOTT MARTIN BRIAN NEWTON ŁUKASZ JASIŃSKI WALTER GRUBE PAUL PMEWUK MIKE ETHERINGTON MELINDA JOHNSON SOTIRIS ZACHAROPOULOS ARTUR PIETREK WILLIAM C ALLEN ANDREJS STROKINS PATRYK MIKOŁAJCZAK MACIEK LASZCZ ALLEN MOCK MD ANDIEJOY RICHARD JONES PAWEŁ CUDNOCH WORKLION WILL CLINGON ADAM SLOMKOWSKI SLOMKAADAS .................................................................................................... For more check my instagram profile:   / stavros_gakos​   ​ Remember to subscribe my buddy, Łukasz Giergasz (with engilsh subtitles) Click here:    • Finał renowacji. Moja nowa strugnica dosta...   Let's start the work: (0:00​​) The mortise opening by key-hole saw: (0:14) Removing the waste with flat chisel: (0:34​​) Widening the mortise with my shop made cheek float: (0:40) Flattening the abutment with my edge float: (1:01) Flattening the bed : (1:14) Little help of key-hole saw: (1:24) Widening the mortise with my shop made cheek float: (1:39) Flattening the bed and the abutment with my edge floats: (1:55) Checking the bed: (2:28) Working on the bed: (2:56) Few smoothing touches on the bed: (3:34) The mouth opening to the blade thickness: (3:24) Another: (4:01) The mortises are done: (4:06) Flattening the bed: (4:14) Temporary wedge: (6:04) Making conical escapement: (6:22) Removing the temporary wedge: (8:22) Marking the depth of the bottom rabbet: (8:57) Marking the depth of upper rabbet: (9:19) Cutting the rabbets with my sash fillister plane: (9:32) Cleaning the side of the rabbet: (10:15) Cleaning the rabbet with my badger plane: (10:29) Cutting the cove with my cove plane: (11:44) The same process on the second side of the plane: (12:46) Marking chamfers: (14:37) Cutting the chamfers: (15:09) Smoothing with 800 grit sandpaper: (18:09) Stamping: (18:29) The stage is done: (19:13)