Re-pivoting a French Clock Wheel

In this video, Chris demonstrates a technique for replacing a broken pivot on a hardened French Clock Lifting Wheel. Chris uses a technique of drilling the new hole by hand with a double-ended pin vise in his Sherline Lathe.

Join Today
Making gears by hand without machines - Part 1 - Kosmos
▶︎

Making gears by hand without machines - Part 1 - Kosmos

Pivot Center Finder Tool Video
▶︎

Pivot Center Finder Tool Video

Harrison Mill Resto 42 - Vertical Reassembly Begins!
▶︎

Harrison Mill Resto 42 - Vertical Reassembly Begins!

#037 Re-pivotting an arbor from a 19th Century longcase/tallcase clock.
▶︎

#037 Re-pivotting an arbor from a 19th Century longcase/tallcase clock.

022 Bushing a clock mainspring barrel using the traditional workholding technique, the boxwood chuck
▶︎

022 Bushing a clock mainspring barrel using the traditional workholding technique, the boxwood chuck

Making a .12mm carbide drill bit for repivoting
▶︎

Making a .12mm carbide drill bit for repivoting

Re pivoting a Cuckoo clock wheel
▶︎

Re pivoting a Cuckoo clock wheel

Re-pivoting a clock wheel - At the bench with Jobson Clocks.
▶︎

Re-pivoting a clock wheel - At the bench with Jobson Clocks.

Re-Pivoting Escape Wheel
▶︎

Re-Pivoting Escape Wheel

#033 Cutting a new set of teeth for a clock gear wheel and making our own lathe dividing plate!
▶︎

#033 Cutting a new set of teeth for a clock gear wheel and making our own lathe dividing plate!

How to repair pendulum clocks - LIVESTREAM #012 2021_05_20
▶︎

How to repair pendulum clocks - LIVESTREAM #012 2021_05_20

James A. Lea, The Village Clockmaker. #22 Repivoting a contrate wheel arbor.
▶︎

James A. Lea, The Village Clockmaker. #22 Repivoting a contrate wheel arbor.

Setting up a Schaublin 102 to cut a clock wheel.
▶︎

Setting up a Schaublin 102 to cut a clock wheel.

Restoring a 1940s Omega 30T2 PC: Watchmaker’s Lathe Tutorial | How I Fit a New Barrel Arbor Bushing
▶︎

Restoring a 1940s Omega 30T2 PC: Watchmaker’s Lathe Tutorial | How I Fit a New Barrel Arbor Bushing

Clock rebushing and proposal for finding the position of the original pivot holes
▶︎

Clock rebushing and proposal for finding the position of the original pivot holes

Inspecting a clock for repair and re pivoting.
▶︎

Inspecting a clock for repair and re pivoting.

How to polish mechanical clock wheel pivots
▶︎

How to polish mechanical clock wheel pivots

012 Making a drill for re-pivotting clock arbors #Clock #Repair #Workshop #Tools #Craft
▶︎

012 Making a drill for re-pivotting clock arbors #Clock #Repair #Workshop #Tools #Craft

Restoration Of A French Crystal Regulator Clock
▶︎

Restoration Of A French Crystal Regulator Clock

How to bush a worn pivot hole - clock repair basics
▶︎

How to bush a worn pivot hole - clock repair basics