Improve the smoothness of your mini Innofader drastically!

If you own a Native Instruments Z2 and ever wondered how you can make the mini Innofaders that are installed just as smooth as the Magvel faders in a Pioneer DJM-S9 - here is the solution. It's simple, but takes some skill. Oh, and you will definately loose your warrenty on the mixer. If you try this mod, do it at your own risk! WARNING! There is a little tiny spring at the bottom of one of the two black plastic bricks that hold the rails. DO NOT LOOSE IT! After you have reassembled the rails (one with the rubber rings), thhe slider and the two black bricks, and have put this back into the black metal housing you have to make sure that you put the tiny spring back into the hole. Otherwise the rails will have no contact with the board and you will have reoccuring sound drop outs. Also, you need to re-solder that middle foot onto the board to make sure that the metal housing is connected to the board. Otherwise you will suffer from sound dropouts.