How To Replace Front Brakes On A Range Rover Sport Supercharged

Need to learn how the replacement of brake pads is done on a Range Rover Sport Supercharged? Watch Doug, our Land Rover Master Technician, explain the difference between front brakes installed on a Range Rover Sport Supercharged 2006-2009 that is equipped with the Brembo brake calipers, as opposed to those front brakes on a Non-Supercharged Sport or LR3. Doug will then show you the steps involved in removing and replacing with new brake pads and rotors (and new brake pad sensor). Atlantic British Ltd. stocks all the parts you need for this replacement. Watch this video on RoverParts: https://www.roverparts.com/resources/... 0:00 How to replace front brakes on a Range Rover Sport Supercharged 0:17 Difference between Brembo and standard brakes 0:54 Frequency of replacement of Brembo brakes 01:19 Remove pins and anti-rattle clip 02:53 Save pins and clean up to reuse 03:13 Cut pad sensor wire 03:21 Compress the 4 pistons before you remove the pads 04:29 Old pads slide out 05:06 Take off caliper and swing off to the side 07:13 Remove old rotor 08:54 Use small wire brush to clean up around the hub 09:32 Install new rotor 10:30 Re-install Brembo brake caliper 11:05 Brush off dirt and build up 11:32 Add on new brake pads 12:21 Install upper and lower pins, and anti-rattle clip 13:18 Put back wheel speed sensor 14:01 Replace pad depth sensor harness 14:32 Peel back liner to access sensor, replace, and reroute 19:51 Replace grommets holding liner 20:42 Order information Please refer any questions or comments to 1-800-533-2210, or go to the questions tab at https://www.roverparts.com Parts List: https://www.roverparts.com/range-rove... https://www.roverparts.com/brakes/pad... https://www.roverparts.com/brakes/rot... #atlanticbritish #brembobrakes #rangeroversportsupercharged