Sculpfun S30 Pro Max Tests – What It Can REALLY Cut And What It Can't

In this video, I test the Sculpfun S30 Pro Max 20W diode laser on a variety of materials to see what it can REALLY cut — and what it can't. I tried different types of plywood, thick pine wood, acrylic, and even kraft paper, using real settings and real conditions. Some results were expected… but a few were definitely surprising 👀 🔧 Materials tested: • 3mm Baltic birch plywood • 3mm plywood (different sheet) • 2mm poplar plywood • 6mm Baltic birch plywood • 20mm pine wood • Black acrylic • Blue acrylic • Mirror acrylic • Kraft paper 00:00 Intro / Preview 00:10 3mm Baltic Birch Plywood 01:08 3mm Plywood (Different Sheet) 01:16 2mm Poplar Plywood 01:57 6mm Baltic Birch Test 02:18 20mm Pine Wood 04:24 Blue Acrylic 04:51 Black Acrylic 05:36 Mirror Silver Acrylic 05:55 Kraft Paper Test 07:10 Final Results and Thoughts 💡 If you're thinking about getting a 20W diode laser — this video will give you a clear idea of its real capabilities. 👉 Watch my full setup & first test video here:    • Sculpfun S30 Pro Max — Unboxing, Setup & F...   👉 Visit my channel:    / @homewoodworkz_gifts   Let me know in the comments — which material surprised you the most? #lasercutting #diodelaser #sculpfun #laserengraving #acryliccutting This channel is dedicated to laser cutting and laser engraving tutorials, LightBurn tips, and DIY laser projects. Subscribe for new videos!