How To Change Engine Oil & Gear Oil - DIY Step By Step Guide || Ray ZR 125

Importance of Periodic Engine Oil and Gear Oil Change : Regularly changing your motorcycle's engine oil and Gear Oil is crucial for maintaining optimal performance and longevity of the engine. Fresh engine oil ensures proper lubrication, reduces friction between moving parts, helps in cooling the engine, and prevents sludge build-up. Also the gear oil ensures smooth power transfer and prevents wear in the transmission system. Dirty or low gear oil can lead to jerky rides and long-term damage. Neglecting these maintenance tasks can lead to reduced engine efficiency, overheating, increased fuel consumption, and ultimately, costly repairs. ⚙️ What to Take Care Of: 1. Use the correct oil grade recommended by the company. ( refer user manual) 2. Warm up the engine slightly before draining oil — this helps flush out old oil more effectively. 3. Clean the drain bolt and washer, and check for metal debris. 4. Always reattach the oil cap tightly and avoid overfilling. 5. Properly dispose of old oil in an environmentally safe manner. Step-by-Step Guide to Change Engine Oil and Gear Oil : Tools and Materials Needed: New engine oil (check your motorcycle manual for the correct type and amount) New Gear Oil Socket wrench or spanner Oil drain pan and small container Funnel Clean rag or paper towels Gloves Plier or tool to remove dipstick or gear oil cap Motorcycle stand (optional, but recommended for easier access) Steps: 1. Preparation: Ensure your motorcycle is on a stable surface. Use a motorcycle stand if available. Run the engine for a few minutes to warm up the oil, making it easier to drain. 2. Drain the Old Oil: Locate the oil drain plug, usually found at the bottom of the engine. Place the oil drain pan underneath the drain plug. Use a socket wrench or spanner to remove the drain plug. Allow the oil to completely drain into the pan. Once drained, clean the drain plug and replace it, tightening it securely. 3. Clean Drain Bolts & Dipstick: Clean the drain bolts, dipstick or gear oil cap. Also clean the surface to ensure no debris enters into the engine or gearbox. Check the condition of gaskets or O rings and change it if it is damaged. 4. Add New Oil: Locate the oil fill cap, usually on the top of the engine. Remove the cap and place a funnel in the opening. Pour the new engine oil into the engine, being careful not to overfill. Check your motorcycle manual for the correct oil capacity. Replace the oil fill cap securely. 6. Check the Oil Level: Start the engine and let it run for a few minutes to circulate the new oil. Turn off the engine and wait a few minutes for the oil to settle. Check the oil level using the dipstick or sight glass and add more oil if necessary to reach the correct level. 7. Clean Up and Dispose of Old Oil: Wipe any spilled oil from the engine and surrounding areas. Dispose of the old oil and oil filter properly by taking them to a recycling center or an auto parts store that accepts used oil. Regular Maintenance Schedule: Consult your motorcycle’s manual for the recommended oil change intervals, which typically range from 3,000 to 5,000 miles (4,800 to 8,000 kilometers) or every 6 months, whichever comes first. For gear oil it's around 10000 kms or 2 years. Keeping track of your oil change schedule helps ensure your motorcycle runs smoothly and extends the life of your engine. #YamahaRayZR #ScooterMaintenance #OilChange #RayZR125 #EngineOilChange #GearOilChange #TwoWheelerCare #ScooterTips #RideSmooth #RayZROwners #engineoil #gearoil #yamalube #diy #guidance #mechanic #repairing #service #yamaha _______________ RANGO_REVZ Instagram link :- https://instagram.com/rango_revz?igsh... Facebook page :- https://www.facebook.com/rangorevz?mi... THANKS FOR WATCHING 💚👽💚