Diagnostics tests , " injector solenoid & wiggle test " شرح برنامج CAT ET

The ECM sends a pulse to each injector solenoid. The pulse is sent at the correct time and at the correct duration for a given engine load and speed. The solenoid is mounted on top of the fuel injector body injector solenoid test by (Cat ET), the ECM is commanding each injector ON/OFF and you can observe the respond. If you can hear “click” sound or not. injector solenoid test, we did the test only with stopped engine steps for injector solenoid test Ø Start the engine. Ø Allow the engine to warm up to normal operating temperature. Ø Then Stop the engine. Start "Injector Solenoid Test" by CAT ET · Click on Diagnostics · Then Diagnostic Tests · Then Injector Solenoid Test You will find these buttons · Change: Changes from “ON” to “Shutdown” and opposite · Power All: Returns all cylinders to the “On” · Shutdown All: Changes all to “Shutdown.” · Start: start the test. · Stop: Stops the test. Top drive Tds-11sa Rig drilling Assistant mechanic Chief mechanic Interview for rig drilling jobs Guide for fresh graduated Guide for assistant mechanic Drawwork Cat engine Kommey unit BOP Rotary table Crown block Travelling block Dead line anchors