INAV Setup Guide for RC Planes (Before & After Install) | My Method for a Perfect Maiden
✈️ Welcome to Stones RC Channel! In this video we walk through my complete INAV setup process that I use on every RC plane build before the maiden flight. This guide is designed especially for new pilots learning INAV and wanting a reliable way to configure their aircraft safely before flying. I split my setup into two important stages that makes preparing and configuring a flight controller in INAV much easier and safer for a successful maiden flight. Part 1 – Basic INAV Setup (Before Installation) Before installing the flight controller into the aircraft, I show how I: • Install and update the INAV firmware • Perform the initial configuration • Set up key settings before anything is wired This stage creates a clean and stable base configuration before the flight controller is installed into the aircraft. Part 2 – Final Setup (After Installation) Once the aircraft is fully built and everything is connected, we go back into INAV to: • Recheck the configuration • Setup connected components • Configure modes and inputs • Verify sensors and hardware • Prepare the aircraft for a safe maiden flight Although this is a longer video, it is designed to help new RC pilots understand INAV better and reduce mistakes during setup. This is my preferred workflow when building FPV planes and long-range aircraft, and it has helped me achieve many successful maiden flights. ⚠️ Important: Always double-check your configuration and follow safe procedures before flying. If you choose to follow this setup process, do so carefully and at your own risk. Good luck with your build, and may you have a successful maiden flight! ✈️ If you’re interested in underwater drones, check out the CHASING Dory , you’ll find the product link and discount code below: 👉 CHASING Dory: https://bit.ly/4qWT86P Discount code: STONES5 🔹 My RC Gear: Caddx FPV: https://caddxfpv.com/?ref=stonesrccha... Walksnail Avatar Moonlight Camera: https://caddxfpv.com/products/walksna... Walksnail Avatar GogglesX: https://caddxfpv.com/products/walksna... Walksnail Avatar HD Pro Kit (Dual) : https://caddxfpv.com/products/walksna... XTAR Transmitter Batteries - https://www.xtar.cc/product/xtar-1865... SpeedyBee F405 Wing Flight Controller: https://www.speedybee.com/speedybee-f... Volantex Phoenix 2400 Glider: https://www.volantexrc.eu/volantex-rc... INAV Setup - https://inavfixedwinggroup.com/guides... ELRS - https://www.expresslrs.org/quick-star... 🔹 Related Videos & Playlists: ▶ Phoenix 2400 Build Playlist: • Phoenix 2400 ▶ INAV Tutorials Playlist: • iNav ▶ HD FPV Setup Playlist: • HD FPV Video Setup and Goggles 🔹 Follow & Subscribe: ✅ Subscribe for more RC tutorials, reviews & FPV flights: / @stonesrcchannel #RCPlanes #INAV #ELRS #FPV #StonesRCChannel #speedybee

Simplified INAV for fixed wing

How I Maiden an INAV Fixed Wing Model (INAV for Beginners 2026)

MAKE A 4G LTE RASPBERRY PI DRONE WITH LIMITLESS RANGE | The Ultimate BVLOS Guide

My Top INAV Pro Tips for 2026 (INAV for Beginners Series)

I Configured My VTOL With INAV — Here's How

Volantex Phoenix 2400 | 4K Flight with Walksnail Moonlight – LiPo vs Li-Ion Efficiency & INAV Tune

AI Said This Wing Is 27% More EFFICIENT. So I Built It and Flight-Tested It!

Phoenix 2400 FPV Build Series Part 2 of 4 – Electronics Setup & Install | iNav, ELRS

INAV: Why don't my control surfaces move much?

Exposing RC's BIGGEST Scam

INAV Flight Modes explained for beginners (INAV for Beginners 2026)

INAV Troubleshooting - Motor Won't Spin & Arming

Build a VTOL RC Airplane with iNav // HEEWING T1 RANGER

Basic plane setup, showing all the steps (with ELRS!)

Phoenix 2400 INAV 9.0.1 Fixed Alt Hold + Walksnail Frequency Hopping + Atom RC Servo Gimbal TEST

iNav Auto Launch 🤖🛫 How to and Demo of Procedure

AI Designed This Organic Flying Wing… I Had to Build It (+16% Efficiency)

INAV setup on a Matek F405-Wing v2 (INAV for Beginners 2026)

Building an AtomRC Dolphin with FC, GPS and Rx (INAV for Beginners 2026)

