Step by Step Installation Solis 50kW Inverter & Dawnice 225kWh Outdoor Battery Cabinet

Welcome to the official installation guide for connecting the Solis 50kW High-Voltage Inverter to the 225kWh Dawnice Outdoor High-Voltage Cabinet Battery. In this comprehensive tutorial, we walk you through the entire hardware wiring and software configuration process to ensure your commercial energy storage system is set up safely and efficiently. What you will learn in this video: Power Cable Connections: Step-by-step instructions for connecting the battery-side and inverter-side power cables via the busbar. Communication Wiring: How to properly route and connect the CAN and RJ45 communication cables between the battery cluster control box and the inverter's BMS port. Grid & Load Setup: Demonstration of a single-phase connection for the load and a three-phase five-wire connection for the grid. System Grounding: Best practices for installing grounding cables on both the battery cabinet and the inverter. System Configuration: A complete walkthrough of the Solis inverter system settings, including selecting the 1Batt2DC connection method, choosing the Lithium Battery type, and setting up the PYLON_HV protocol. ⚡ About Dawnice: Dawnice is dedicated to providing safe, reliable, and high-capacity outdoor durable energy storage solutions. No Energy Waste! 👉 Don't forget to like, subscribe, and leave a comment if you have any questions about the installation process!