Sperax P1 Walking Vibration Pad: E6 Code Solution -Part2

"Is your Sperax P1 showing error E6 codes? 🔧 Follow our guide to troubleshoot and restore your treadmill! In this guide, you’ll learn: ✅ 1. FULL POWER CYCLE – Switch off the power supply and wait until ALL LED indicators are completely extinguished (ensures system reset). ⚠️ ✅ 2. REBOOT & SELF-TEST – Restart the treadmill and wait 30 seconds for completion of the core system self-test (listen for the ""beep"" prompt). 🔄 ✅ 3. VIBRATION MODE TEST – Activate Vibration Mode (non-load-bearing) and run continuously for 2-3 minutes (check for abnormal shaking/noise). 📳 ✅ 4. WALKING MODE VERIFICATION – Immediately switch to Walking Mode (low speed) and operate for 1 minute (validate drive system stability). 🚶‍♂️ ✅ 5. FINAL DIAGNOSIS – Monitor display readings and mechanical response to confirm normal operation (no errors/jerking/abnormal sounds). ✔️ 👉 Get The Help! Contact Sperax Support: • Global Support Portal: https://linktr.ee/sperax.official • Sperax Official Amzon Center Email: [email protected] • Sperax Official Support Center Email: [email protected] Quality is at the heart of everything we do. 👍 LIKE this video if it helped! 🔔 SUBSCRIBE for more Sperax maintenance tips: Sperax_Amzon #Sperax #SperaxAmzon #SperaxP1 #WalkingVibrationPad #SperaxFAQs #SperaxEverywhere"